Building Queen Bed Drawers

Nov 8th

Queen bed drawers may seem like a waste: everything cubic footage covered with draping bedding, contributes nothing to neatness or storage room. By replacing single queen bed drawers, you can add more than 30 cubic feet of accessible storage.

Queen Bed Drawers Wood
Queen Bed Drawers Wood

Instructions

12 Photos Gallery of: Building Queen Bed Drawers

Image of: Queen Bed Drawers Black
Image of: Queen Bed Drawers Brown
Image of: Queen Bed Drawers Contemporary
Image of: Queen Bed Drawers Design
Image of: Queen Bed Drawers Low
Image of: Queen Bed Drawers Modern
Image of: Queen Bed Drawers Review
Image of: Queen Bed Drawers Small
Image of: Queen Bed Drawers Storage
Image of: Queen Bed Drawers underneath Plans
Image of: Queen Bed Drawers White
Image of: Queen Bed Drawers Wood
 

Sand all surfaces of your timber using coarse sandpaper. Set a long beam and L, with the long end of the beam to the surface of the short. Screw using two screws. Add the other short beam to the free end of the long beam; turn your L to square C. Screw together like you did the first.

Slide the second long bar between the arms it runs parallel to the other long beam for queen bed drawers. The centers of the beams should be 16 inches apart. Screw in place as in the previous steps. Slide shortest beam between the arms of the C, which runs parallel with the short bars and the open side of the frame. It should be equidistant from each branch. Screw in place. Place a sheet of plywood to the frame so that it covers the open side and its inner edge runs along the middle of the central support beam. Sand all exposed debris with fine sandpaper.

RELATED:   Modern California King Bed with Drawers